Видео

Always wait until the ground coat is dry. Then go to next step

One that's going away if the dude would ever come and get it

Dependant on temperature and application of the mask

I used LASfit.

Negative. I try to stay away from.restorations in general believe it or not😂

I believe it was just a small run he made on it. There's some.others on the market I'm looking to revisit this video with

Glad it helped!

Glad I could help!

Many different ways to skin the cat!

Yes its permanent, just like any other 2k bedliner. For removal you can try a torch or blasting it.

Thanks! Got a couple more coming that Im working on now. Polishing video is next, hoping to have it out next week.

I always followed you from ever u spoke about Sata spray gun

The original 3:1 7900 was a phenomenal clear and my alltime favorite DuPont/Axalta clear. When they reformulated it to the G2-7779 and made it a 4:1 I absolutely hated it. I have heard they brought back the original. If it's true, that's great....use the 7795 hardener. Spray it like you want it to look and walk away. 10 minutes later, do it again. SATA 3000 1.3 RP with a full trigger at 30 psi was MONEY with that clear

That rp 3000 does dump some clear I have one of the biut the nozzle piece is Cross treaded

So do I lol

It comes in handy. However when tag teaming a job.....I always know what Im stuck painting everytime! ahahahahaha

Thanks!

The XC they have in black and tintable

Take your time. Not everything is the same!

@@inthehomeshop Trust me, taking my time hasn't been a problem. As I see it, your technique should work for the trim I've been stuck on.

Boom!!!!

Sounds like you got the paint too thick on the moving parts. If it's a tilt head model, one coat of color and clear is all you need at the pilot point elsewhere you will run the risk of it doing as described. The bowl lift models are much easier for this reason

Thanks for the reply. What do u recommend I do? Is there something I can spray on to remove all the paint and redo a thinner coat. And yes I did spray a lot 😅

@esamalamad855 unfortunately you've got alot of sanding ahead of you. I highly suggest against using chemicals to remove the paint as this is used for food

Got it thanks. Any advice on what grit sandpaper to use ? And I should sand until the original color goes through?

@@esamalamad855 it depends on what you used and how thick it actually is. The thicker it is, the longer it takes to cure. Not dry, cure. Cure is different than dry. I'd sand it down to whatever you started with with 180 and re-prime

DA- Dual Action

Still to this day, this was the most fun video I've made. Kevin is a dear friend of mine and he encouraged it and told me to have fun. 😂

for any type of spraying, the minimum i always recommend is a 5hp, 60 gallon with at least 15 cfm. It will get you the bare minimum on what your basic CFM needs and storage are

@inthehomeshop great, thank you sir!

@@ericmann7945 anytime!

You need volume more than pressure. Most RP or HVLP guns need 10-13 CFM, you're correct!! that requires a decent air compressor.

When i painted this car all those years ago, it originally was done with Spies base and clear.

How did the job hold with first paint job and which clear u had used

It held great. Only reason I stripped it was because when it came to me I saw the roof was cracking. We originally thought it had been repainted once before they got it, then mine. So 3 jobs.....initial plan was to sand down the job I did years ago, prime it, and give it a refresh. A simple respray. When I started sanding to see why it was cracking it got bigger and bigger through each layer and was cracking all the way down the 15 layers we found. That's one of the pics I put in the last video. Had no choice and I told them I was going to strip it. They're parents of a LONG time friend and basically a second family to me. I couldn't let it go like that and had to fix

If your car is aligned or your headlights? You're asking on a video about aligning headlights

@@inthehomeshop sorry headlight

@@Robert-zv9tq there's several different ways to align them. As I said in the video, a simple Google search pulls up many

@@inthehomeshop alright thank you

Thanks. There's lots of ways, I just showed what I was taught and works well for me. Glad it helped!

that is a SATA 1500 1.3 RP . I put their digital gauge on it which is the ADAM 2

As I've said many times over, something happened in the render process and I didn't know until way later. Thanks for the comment!

They don't manufacture it. Google Staurolite and it will pop up😎